TRIJICON ACOG 4x32 Riflescope w/Dual Illuminated Red Chevron Reticle w/ 3.25 MOA RMR Sight and TA51 Mount
Item #: TA31F-RMR - TA31F-RMR
Availability: Call for Availability
Usually ships In Please call 866-759-9523
Retail: $2,210.00 Price: $1,878.50
- Flattop Mount (TA51) is included in the package
- Military-Grade Aluminum Alloy Housing
- Waterproof to 100 Feet
- Trijicon fiber optic
- Bullet Drop Compensator
- Long Eye Relief
- Totally Battery-Free
- Broad Band Anti-Reflective Coated Lenses
- Proudly Made in U.S.A.
- Trijicon Tritium Phosphor Lamp
The ACOG 4x32 riflescope (TA31F-RMR)
features with chevron
reticle which is designed to be zeroed using the tip at 100 meters. The
width of the chevron at the base is 5.53 MOA which is 19 in. at 300
meters. This allows range estimation for silhouette targets.
The riflescope features dual illumination (fiber optics provides
daylight illumination and tritium illuminates reticle at night). The
ranging reticle is calibrated for 5.56 (.223 cal) flattop rifles out to
Trijicon ACOG scopes are internally-adjustable, compact telescopic
sights with tritium illuminated reticle patterns for use in low light or
at night. Bindon Aiming Concept (BAC) models feature bright daytime
reticles using fiber optics which collect ambient light. The scope
combines traditional, precise distance marksmanship with close-in aiming
speed. Although it has many features which are very advantageous for
military use, they were developed by Trijicon without government
|Aluminum Alloy Housing
Like all Trijicon Acog Scopes, the 4x32 riflescope features with Military-Grade Aluminum Alloy Housing. Forged 7075-T6 aircraft aluminum alloy housing provides for a nearly indestructible sighting system.
|Battery Free System
The scope delivers increased hit potential in all lighting conditions - without the use of failure-prone batteries.
|Made in the U.S.A.
The rifle scope is created and produced in a large, modern, fully equipped facility located on a five-acre site in Wixom, Michigan. Trijicon’s state-of-the-art machining center includes CNC mills and lathes, inspection equipment, and a full array of finishing equipment. The assembly area features two clean rooms that provide a dust-free environment for scope assembly.
The original Trijicon facility was constructed in 1993, and then expanded to twice its original size in 2004. The building houses manufacturing, administrative, plus research and development functions all under one roof.
|Objective Lens Diameter, mm
|Field of View (FOV) @100yds
|Exit Pupil, mm
|Eye Relief, in
|Adjustment (clicks/in), @100yds
The TA31F-RMR also includes:
1 3.25 MOA Trijicon RMR™ attached with mount (RM01)
1 Flattop Mount (TA51)
1 Lenspen (TA56)
1 Trijicon Logo Sticker (PR15)
1 ACOG BAC Manual
1 Warranty Card